( SAMPLE PHOTOS ) This is for a used JDM 2006-2007 Subaru Impreza WRX /Wagon 2.0L replacement for the 2.5L DOHC turbo dual AVCS EJ20X engine only. (BP5, plastic intake manifold)
30 DAY WARRANTY
NOTE: THIS IS THE REPLACEMENT ENGINE FOR THE 2.5L MODELS
These two motors are basically the same, The X was used in Automatic packages, and the Y in Manual packages. These both had different turbo sizes except for the JDM 07+ legacy BL5 (sedan) and BP5 (Wagon). EJ20X/EJ20Y are open deck engines whereby the cylinder walls were supported at the three and nine o’clock positions. It came with an aluminium alloy block with 92.0 mm bores – with cast iron cylinder liners – and a 75.0 mm stroke for a capacity of 1994 cc. with thicker cylinder walls than ej25 The crankcase for the EJ20X and EJ20Y engines had five main bearings and the flywheel housing was cast with the crankcase for increased rigidity. The EJ20X engine is understood to have a forged crankshaft and connecting rods, but cast aluminium pistons with forged crowns. The EJ20X and EJ20Y engines had an aluminium alloy cylinder head with cross-flow cooling, double overhead camshafts (DOHC) per cylinder bank and four valves per cylinder that were actuated by roller rocker arms. The EJ20X and EJ20Y engines were the first EJ engines to be equipped with Subaru’s ‘Dual Active Valve Control System’ (‘Dual AVCS’) which provided variable intake and exhaust valve timing. For the BL.I Legacy GT, the EJ20X engine was fitted with a twin-scroll IHI VF38 turbocharger; the EJ20Y engine, however, had a larger twin-scroll Mitsubishi TD04 HLA 19T turbocharger. For the revised BL.II Legacy GT, both the EJ20X and EJ20Y had an IHI VF44 turbocharger for the initial 2006 model year, replaced the following year with the IHI VF45.
Both came with a 9.5:1 compression and a fast spooling turbo yields a torque filled performance. (265-280 bhp)
- LEGACY GT
- IMPREZA WRX WAGON
- IMPREZA WRX (2006-2007)